Windows#
Windows is the most likely of the supported operating systems to interrupt a long capture. It aggressively saves power, updates itself and runs background tasks. Computer manufacturers also add their own power management and support software, and some hide settings. The goal is a computer that stays awake, at full power, with nothing running in the background.
These steps apply to Windows 11. See Host configuration for the general guidelines.
Configure high accuracy time#
By default, Windows synchronizes its clock infrequently, so the clock can be off by many milliseconds. The Joulescope UI can configure Windows for high accuracy time, which synchronizes the clock every 64 seconds.
In the Joulescope UI, select Tools → Configure high accuracy time.
Windows asks for permission to make changes. Select Yes. You need administrator rights.
You only need to do this once. The setting remains after restart. For details, see Microsoft’s Configuring systems for high accuracy.
To check the time synchronization status, open a terminal and type:
w32tm /query /status
Last Successful Sync Time should be within the last few minutes. The clock is only as accurate as its time server and network. For the best accuracy, use a local NTP time server.
Power settings#
These settings matter even when you log at a low sample rate. The JS110 always streams its full 2 million samples per second to the computer, which does the downsampling, so a low sample rate in the Joulescope UI does not reduce the computer’s processing load. The JS220 and JS320 downsample on the instrument.
Plug a laptop into its power adapter.
Open Settings → System → Power & battery.
Set Power mode to Best performance.
Under Screen, sleep, & hibernate timeouts, set the screen, sleep and hibernate timeouts for when plugged in to Never.
Open Settings → Accounts → Sign-in options. Set If you’ve been away, when should Windows require you to sign in again? to Never, and turn off Dynamic lock.
Press Windows+R, type
powercfg.cpland select OK to open the Control Panel Power Options. Select High performance if it is listed. Then select Change plan settings → Change advanced power settings and set:USB settings → USB selective suspend setting = Disabled
PCI Express → Link State Power Management = Off
Processor power management → Minimum processor state = 100%
In Power Options, select Choose what the power buttons do → Change settings that are currently unavailable, then clear Turn on fast startup.
Open Device Manager. Under Universal Serial Bus controllers, open each USB Root Hub and Generic USB Hub. On the Power Management tab, clear Allow the computer to turn off this device to save power. Not all devices have this tab.
Keeping the screen on and unlocked is a precaution for unattended captures with the Joulescope UI open. We have reports of the Joulescope UI stopping responding during multi-day captures after the computer was idle for a long time with the screen off, but have not confirmed the cause.
Some computers hide settings in Power Options. Instead of steps 2, 4 and 5, you can open a terminal as administrator and type:
powercfg /change monitor-timeout-ac 0
powercfg /change standby-timeout-ac 0
powercfg /change hibernate-timeout-ac 0
powercfg /setacvalueindex scheme_current 2a737441-1930-4402-8d77-b2bebba308a3 48e6b7a6-50f5-4782-a5d4-53bb8f07e226 0
powercfg /setacvalueindex scheme_current 501a4d13-42af-4429-9fd1-a8218c268e20 ee12f906-d277-404b-b6da-e5fa1a576df5 0
powercfg /setacvalueindex scheme_current 54533251-82be-4824-96c1-47b60b740d00 893dee8e-2bef-41e0-89c6-b55d0929964c 100
powercfg /setactive scheme_current
powercfg /hibernate off
The /change lines set the screen, sleep and hibernate timeouts to never
when plugged in. The setacvalueindex lines turn off USB selective suspend and PCI Express
link state power management, and set the minimum processor state to 100 %,
when plugged in. The last line turns off hibernate and fast startup.
For the most demanding captures, you can also disable processor C-states in the computer’s BIOS or UEFI setup.
Updates#
Windows Update can take over the computer and restart it in the middle of a capture.
Before the capture, install pending updates and restart.
Open Settings → Windows Update and select Pause updates for longer than the capture.
Turn off automatic updates in other software, such as the computer manufacturer’s update or support software. Some manufacturer support applications pause the computer for several seconds each day. Quit them or disable their services.
For critical captures, disconnect the network: unplug the Ethernet cable and turn off Wi-Fi. This is the most reliable way to prevent updates and restarts.
Before you start, also update the graphics, USB and network drivers and the BIOS from the computer manufacturer.
Background tasks#
Save recordings to a local folder that is not synced by OneDrive, Dropbox or similar, for example
C:\joulescope. Windows often puts your Documents folder in OneDrive by default.Quit applications you do not need, such as Teams and Outlook. Pause OneDrive and other cloud sync.
Turn off or reschedule backups.
Antivirus software with real-time scanning can slow the Joulescope UI and get worse over time. If you cannot turn it off for the capture, add exclusions for the Joulescope UI and the recording folder. For Microsoft Defender, open Windows Security → Virus & threat protection → Manage settings → Add or remove exclusions.
Check that Task Manager does not show the Joulescope UI in Efficiency mode, which reduces its priority.
On computers with two graphics processors, open Settings → System → Display → Graphics and set the Joulescope UI to High performance.
Memory compression#
Windows compresses memory by default. Memory compression can reduce performance, especially if you increase the Joulescope UI memory buffer size on a computer with a lot of RAM.
To check whether memory compression is on, open PowerShell as administrator and type:
Get-MMAgent
If MemoryCompression is True, memory compression is on. To turn it off, type:
Disable-MMAgent -mc
Then restart the computer.
Storage#
Check that the recording drive is healthy and has enough free space. In
File Explorer, right-click the drive and select Properties → Tools →
Check. You can also check the system files by opening a terminal as
administrator and typing sfc /scannow.